Degreasers/Cleaners

CB 100

Water- based low foaming Cleaner

CB 100 is a water-based, low-foaming cleaner based on renewable raw materials. Its natural active ingredients dissolve contaminations powerfully without pitting the surfaces.
It has a pleasant odour, it is solvent- and VOC-free, and it does not require labelling under the CLP Regulation, which makes it an effective alternative to solvents or paraffin.
In addition, it is low-foaming and has a long service life, this guarantees effective use in closed-loop systems. The cleaner can be used for a long time, and less waste is produced.
Therefore, CB 100 not only protects the employees but also the environment.
Moreover, the cleaner can be rinsed off with water without leaving residues, which makes it suitable, in addition to maintenance, also for applications in some sectors of the foodstuffs industry.

Advantages:
• VOC-free
• Nature Boost: based on renewable raw materials
• No labelling required under the CLP Regulation
• Low-foaming
• Water-based, phosphate- and solvent-free cleaner
• Strong dissolving power with constantly good cleaning performance
• For the removal of strong contaminations, such as special greases that are difficult to remove, rubber marks, bitumen- and wax residues, oils and pastes

CB 100 ALU

CB 100 Alu cleaner and degreaser features a high dissolving power, in particular with persistent greases and dirt

The CB 100 Alu cleaner and degreaser features a high dissolving power, in particular with persistent greases and dirt, and its special aluminium protective formula prevents tarnishing of aluminium, brass and non-ferrous metals. The cleaning agent can be used in manual and mechanical applications and is also suitable for ultrasonic and immersion processes, which means it can be used effectively in the CLEAN BOX, the CLEAN BOX Flow or in the BIO-CIRCLE parts washer.

• Protects aluminium and brass
• For manual and mechanical cleaning
• Effective corrosion protection

UNO S PF

Bio-Circle UNO S PF is a universally applicable water-based low-foaming alkaline cleaner with integrated temporary corrosion protection.

Bio-Circle UNO S PF is a universally applicable water-based low-foaming alkaline cleaner with integrated temporary corrosion protection. Its alkalinity makes it perfect for removing oil, grease, protein residues, and pigmented ink from materials that would otherwise rust easily when cleaned with a water-based cleaner. It can be used manually; however, its strong point is the application in automatic cleaning devices, such as:
• Pressure washers
• Ultrasonic systems
• Immersion baths
• Hot-water parts washers
With extremely persistent contaminations, UNO S PF can be used undiluted; in mechanical applications, however, application concentrations are usually between 3 and 5 %. UNO S PF can be diluted with water up to 1:40, with the anti-corrosion effect gradually decreasing. Highly sensitive parts such as castings usually require concentrations of 10 to 20 %. Alternatively, Bio-Circle Corrosion protection for water-based systems can be added. Just avoid undiluted application on aluminium or zinc surfaces – dilutions between 1:30 and 1:40 can normally be used without adverse effect.
The low-foaming effect in combination with the fact that UNO S PF is compatible with oil separators facilitates use in automatic cleaning applications with long bath lives. Moreover, its high concentration and good effectiveness already at ambient temperature help save costs.
UNO S PF is also suited for improving occupational safety in the company: As the product is just labelled with an exclamation mark (GHS 07), it is particularly user-friendly. It is also no hazardous substance with regard to transport and storage, so no special precautions are required.

E-NOX Shine

E-NOX Shine is a highly effective water-based cleaning and care emulsion, especially for the cleaning and maintenance of matt and polished stainless steel.

E-NOX Shine is a highly effective water-based cleaning and care emulsion, especially for the cleaning and maintenance of matt and polished stainless steel. It also removes dust, fingerprints, oil and light limescale- and flash rust residues from aluminium and chrome, no-ferrous metals, glass and plastics, ceramics and wood. The ready-to-use care product dries fast on the treated surface and leaves a touch-proof, gleaming and preserving protective film. This film has an anti-static effect and effectively protects from fresh contamination. Printed or etched inscriptions (e.g. on kitchen appliances and elevators) will not be dissolved.

The special emulsion has been approved for the cleaning and care of kitchen appliances and systems in industrial kitchens, breweries, dairy plants and other food-producing or -processing companies. In such companies, cleaning and care is particularly required not only for optical but also for hygienic reasons. Surface treatment of finished metal components and of those that are in use helps retain their value. Parts will also be well protected for extended storage periods.

• Water-based
• Removes dust, fingerprints, and oil
• Maintains metal surfaces, e.g. stainless steel
• Dries fast on processed surfaces
• No labelling required in accordance with the CLP Regulation
• C1 NSF certification
• Silicone-free
• VOC-free

E-NOX Clean

Highly effective, ready-to-use cleaning gel

Highly effective, ready-to-use cleaning gel (can be diluted with water up to 1:40; the gel-like, viscous consistency of the cleaner will decrease as water is added though) for removing mineral residues, such as limescale- and cement residues, extraneous rust, and also light grease- and oil contaminations. Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal. Non-corrosive on iron, V2A steel, non-ferrous metals and aluminium; will not dissolve gypsum- and silicate deposits. The cleaning gel adheres very well to perpendicular surfaces, screens, rollers, etc. This way, the active ingredients can work optimally, and the contaminations are dissolved without scrubbing or scouring, and removed without leaving scratches.
The gel can also be used in the food industry. It can be removed without residues after rinsing with water. According to the German Food, Consumer Goods and Feed Code (LFGB), the cleaner may be used in food-processing companies. It helps fulfil the high demands of the VOC Solvents Directive (DE: 31. BImSchV, AT: VOC-Anlagen-Verordnung – VAV): the limit values do not apply to cleaners with a solvent content of less than 20%.
• Water-based, acidic cleaning gel
• Removes limescale- and cement residues, extraneous rust, and also light grease- and oil contaminations
• Can be diluted with water up to 1:40
• Brightens stainless steel, aluminium and non-ferrous metals without affecting the basic metal
• Removes flash rust from stainless steel
• Contains neither hydrofluoric nor nitric nor hydrochloric acid
• Non-flammable

BIO-CIRCLE L ULTRA

BIO-CIRCLE L Ultra guarantees long bath lives paired with high cleaning performance

BIO-CIRCLE L Ultra guarantees long bath lives paired with high cleaning performance. The cleaning fluid is processed naturally by microorganisms, and using it in the BIO-CIRCLE parts washer supports the long service life by means of the integrated recirculation system.
• The cleaner effectively removes persistent contaminations, such as burnt-in greases and oils, carbon deposits, and paint. After cleaning, the work pieces are temporarily protected from corrosion.
• The Liquid has a pleasant apple scent and contains ingredients on the basis of renewable raw materials.
• In addition, it is VOC-free and does not require labelling under the CLP Regulation. This makes the cleaner safe to use, while protecting the environment.

BIO-CIRCLE L

BIO-CIRCLE L does its cleaning based on water and removes everyday contaminations,

BIO-CIRCLE L does its cleaning based on water and removes everyday contaminations, in particular oils, greases and particle impurities, from work pieces such as moulds.
• Its employment in the BIO-CIRCLE parts washer and the microorganisms contained therein guarantee a long service life for the cleaning fluid. The parts washer filters major particles from the fluid, and the microorganisms degrade the ingressed oils and greases.
• The fluid will not pit the surface of the parts to be cleaned, and special corrosion inhibitors provide temporary protection after cleaning. The Liquid does not require labelling under the CLP Regulation. In addition, it is free from solvents and volatile organic compounds (VOC). The surfactants therein have been selected on the basis of renewable resources.
• Skin friendliness has also been dermatologically tested, which guarantees improved skin protection. A fresh apple scent makes cleaning on the parts washer a pleasant job.
• By using BIO-CIRCLE L, the use of solvents can be avoided altogether. This makes the cleaning agent easy and safe to use, store and transport.
• The environment is protected, and occupational safety is increased.
• The cleaned surfaces can be rinsed with water without leaving any residue, which makes the cleaning agent also suitable for use in the food industry

Power Cleaner 300

 Power Cleaner 300 removes even the strongest residues, such as limescale, boiler scale and urine scale

Also, in a cold state, Power Cleaner 300 removes even the strongest residues, such as limescale, boiler scale and urine scale. In outdoor areas, cement residues and rust are removed with a special penetration effect. Also, concrete surfaces can be cleaned from oil stains effectively.
• Phosphate- and VOC-free, surfactant-based
• Special penetration effect
• Already works in a cold state
• Removes limescale and boiler scale residues, rust and corrosion, cement residues, wall rot, sodium nitrate- and salt efflorescence, oxide stains, and urine scale
• Environmentally conscious concept, contains no hydrofluoric acid
For the removal of limescale and boiler scale residues, rust and corrosion, persistent cement residues, and wall rot. Also sodium nitrate- and salt efflorescence and oxide stains can be removed effectively. Oil and grease incrustations are easily dissolved from exposed-aggregate flagstone, reinforced concrete, and asphalt. Contaminations such as green growth, lichens and moss can be removed from acid-resistant surfaces in parks and cemeteries and on footpaths and terraces. The product won’t pick on surfaces such as glass or similar. The cleaner is ready for use and can simply be applied to the contaminated spot with a brush or paintbrush. Rinse off with plenty of water after a short exposure time. With less persistent contaminations, Power Cleaner 300 can also be diluted.

Power Cleaner 200

Power Cleaner 200 is a highly efficient, phosphate- and solvent-free intensive cleaning concentrate on the basis of cleansing substances

Power Cleaner 200 is a highly efficient, phosphate- and solvent-free intensive cleaning concentrate on the basis of cleansing substances. With its penetration effect, it removes mineral contaminations, such as rust, limescale, and urine scale, from surfaces. Brass-, copper-, aluminium-, and iron tarnishing is also removed quickly. A hygienic cleaning effect can also be achieved the entire sanitary sector and on acid-resistant surfaces in the industry.
• Water-based (highly concentrated, can be diluted with water up to 1:40)
• For manual cleaning
• Phosphate-free and hydrochloric acid-free
• In a cold state it removes cement- and limescale residues, urine scale, and rust
• rass-, copper-, aluminium-, and iron tarnishing is removed
• Removal also of oil-, grease- and protein residues
• Removal of water stains from exposed-aggregate flagstone, reinforced concrete, buildings, tombstones and natural stones
The cleaning agent is suited for manual applications. Can be used for outdoor areas, in particular on terraces, garden paths, parks and cemeteries, and in car parks and petrol stations. cement residues, wall rot, sodium nitrate- and salt efflorescence are removed effectively. The cleaner has been designed with a focus on good thermal stability, so it can also be heated up to 90°C/194°F, depending on the application. Increasing the working temperature will contribute to boosting cleaning performance. Apply the cleaner as a concentrate or diluted with water up to 1:40 and rinse it off after a short exposure time.

GS 200

GS 200 dissolves persistent contaminations in a natural way

GS 200 dissolves persistent contaminations in a natural way. The special advantage of this cleaner is that a big part of its ingredients are based on renewable raw materials and not on oil. These natural ingredients stand out for their extreme dissolving power over persistent contaminations. A fully-fledged alternative to solvents containing VOC and/or irritant substances. An extremely thin layer will suffice for removing persistent contaminations. Optimal performance in combination with employee protection and reduction of environmental impact. The highly-concentrated cleaner and degreaser has been NSF-certified for use in the food industry. persistent greases, anti-rust waxes, adhesive residues, bitumen, tectyl, silicone, sealing compounds, rubber, persistent carbonizations – the products of thermal decomposition of synthetic materials and oil –, and many more can be removed efficiently from ball bearings, worm drives, cylinders and nozzles. Burnt-in oil layers are dissolved and removed safely from gearboxes and motors. Due to its product characteristics, the cleaner will evaporate more slowly than conventional solvents. This results in longer exposure times, and hence high effectiveness and efficiency. It won’t leave any oily residues on the cleaned surfaces.
With its high flash point (> 100° C/212° F), the grease dissolver enhances safety during application. The reduction of VOC provides for very low product fume emissions in application, which means low employee exposure and low environmental pollution.
GS200 is ready for use in manual applications or immersion processes (also recyclable). Just spray it on in a thin layer and wipe it off with an absorbent cloth after a short exposure time. The cleaned surface will then be virtually residue-free.
• VOC-reduced, non-flammable
• An alternative to VOC-containing and/or irritant solvents
• For the removal of very strong contaminations, such as oils and greases, bitumen, lubricants, anti-corrosion waxes, resins, rubber residues and -marks, and paint
• For the removal of burnt-in oil layers from gearboxes and motors
• For the removal of protective film- and adhesive residues
• High flash point (> 100°C/212°F)
• Very economical, an extremely thin layer will suffice
• Excellent cleaning effect also in the cold
• Pleasant odour
• NSF-certified under K3 146720

Power Cleaner DB

The high-performance cleaning concentrate Power Cleaner DB is used in mechanical cleaning

The high-performance cleaning concentrate Power Cleaner DB is used in mechanical cleaning. Mainly in pipe- and heat exchanger cleaning and in spray cleaning, persistent mineral contaminations, green growth, and biofilms are removed effectively. Thanks to mechanical support, also parts that are difficult to reach can be cleaned safely. Especially in closed-loop systems where manual cleaning is not possible, the combination of cleaner and rinsing mechanics achieves good results. Power Cleaner DB features excellent compatibility with built-in materials. Common fields of use in spray cleaning are e.g. maintenance of vacuum toilets, pumps, and water meters, and the removal of process-related corrosion on manufacturing parts.

OMNI

OMNI is a multifunctional liquid for lubricating, protecting, and cleaning

OMNI is a multifunctional liquid for lubricating, protecting, and cleaning. It features an excellent capillarity that facilitates penetrating the contaminations to dissolve them. Moreover, it creates a lubricating film that protects from corrosion and won’t resinify. OMNI dissolves resinified greases and oils and lubricates a variety of parts, from simple hinges to chains to cogwheels. It also protects the parts from corrosion and creeping currents, which makes it suitable for the protection and care of tools/moulds, machines, electronic circuits, and motors.
OMNI contains no hydrocarbon solvents, such as petroleum, and is free from acids, silicones, and Teflon.
Its excellent capillarity that reaches even the tightest of gaps makes it indispensable for daily use in production, maintenance, workshop, building industry, and agriculture. It can also be used for dewatering in immersion baths or for the pre-cleaning of extremely contaminated parts.
• The characteristics at a glance
• Multifunctional spray for lubricating, protecting, and cleaning
• Forms an anticorrosive film
• Removes resinified greases and oils
• Lubricates parts in motion
• Eco-friendly because without hydrocarbon solvents
• Free from acids, silicones, and Teflon
• Can be used for dewatering or in pre-cleaning

Stripper Gel

The highly viscous cleaning gel even adheres to perpendicular surfaces

The highly viscous cleaning gel even adheres to perpendicular surfaces. This means that Bio-Circle Stripper Gel can e.g. be used on metal, wood, stone, concrete, glass, plastics, tiles, and clinker bricks. It can be used to remove the following contaminations:
• Paint and coatings
• Graffiti
• Adhesive residues,
• Burnt-in soot particles
• Resins
• Varnish
• Grout (two-component epoxy-based sealant)
It has a low labelling with an exclamation mark (GHS07) and is halogen-free.
The gel is simply applied to the contamination and removed after an appropriate exposure time. For more details, please refer to the “Application” tab.
The product characteristics at a glance:
• Highly viscous gel mixture of solvents
• Can be used on metal, wood, stone, concrete, glass, plastics, tiles, and clinker bricks
• Removes paint and coatings, graffiti, adhesive residues, soot particles, resins, varnish, and grout (two-component epoxy-based sealant)
• Low labelling, halogen-free
• Easy and safe to use

Smoke Resin Remover

Smoke Resin Remover is universally applicable in the entire foodstuffs industry for the removal of persistent deposits and contaminations.

Smoke Resin Remover is universally applicable in the entire foodstuffs industry for the removal of persistent deposits and contaminations. Escapes and flues in industrial kitchens, restaurant kitchens, and canteens are cleaned; deposits from vent pipes and burnt-in residues from grills and baking- and pizza ovens are removed effectively. The cleaning agent can also dissolve smoke resin residues in smokehouses efficiently, and is used for cleaning the air circulation system in the smokehouses.
For maintenance, the phosphate- and solvent-free cleaner can also be used in immersion processes or ultrasonic baths for the efficient cleaning e.g. of machine parts.
• Highly concentrated, water-based
• Phosphate- and solvent-free
• For the cleaning of smokehouses, cooking facilities, filters, escapes and exhaust hoods, ovens etc.
• Optimal for the cleaning of escapes and flues in industrial kitchens and canteens, and filters

BIO-RUST

BIO-RUST is universally applicable in the derusting of steel- and iron part

BIO-RUST is universally applicable in the derusting of steel- and iron parts and, in addition to slight rust films and fingerprint corrosion, also removes thick rust layers. In addition, the deruster dissolves light oils and greases.
Using it makes neutralization after derusting obsolete because the surfaces are cleaned in the pH-neutral range.
This cleaning in the pH-neutral range ensures excellent material compatibility. Rust is removed form metals in a gentle way, and the material surfaces are not affected.
Also the environment and employees will be protected. The cleaner does not require labelling under the CLP Regulation and is also free from halogens and VOC. This guarantees safe application, and hazardous waste will not be released into the environment.
• Universally applicable in the derusting of steel- and iron parts
• Picks the rust from the surface
• Excellent material compatibility, being pH-neutral
• Halogen-free
• No labelling required under the CLP Regulation
• VOC-free

Bio Grease-Ex

Bio Grease-Ex is a residue-free cleaner with high dissolving power

Bio Grease-Ex is a residue-free cleaner with high dissolving power. It removes extremely persistent contaminations, such as oils and greases, adhesive residues, tar, lubricants, resins, rubber residues and –traces, and paint, from metal, tiles, natural stone, concrete, marble, wood, glass, and all other resistant surfaces. At temperatures of down to –35 °C/-31°F, the cleaning fluid cleans and degreases without effort also complex steel- or stainless steel geometries. Further processing, such as varnishing, pasting or labelling, can follow shortly; workflows are accelerated and costs are saved. Bio Grease-Ex features a natural double action due to the interplay of two components; the alcoholic one dissolves the water-soluble contaminations, the aliphatic one the oil-soluble ones. The contamination- and grease remover features excellent wetting properties. Once dissolved, the dirt is maintained in the solution and won’t settle again on the surfaces. The contaminations can be wiped off or rinsed off effortlessly. Select additives guarantee fast drying. Waiting times between the work steps are reduced to a minimum. The cleaner is easily biodegradable (degradability > 90 %, OECD 301E method), which makes it an eco-compatible alternative to conventional products