Protection and Lubrication

Stainless Steel Spray

The combination of resin and stainless steel powder

Due to the combination of resin and stainless steel powder, Stainless Steel Spray is particularly scratch-resistant, resistant to bending, and impact-proof. Moreover, it is water-repellent and highly resistant to aggressive environmental influences and to acids and liquors.
The surfaces treated with the Spray are sealed and hence permanently protected against external influences.
Therefore, the Spray is used on surfaces both outdoors and indoors, such as railings, moulds, machine parts and components.
Wear and tear on the parts is reduced, which leads to a longer service life.
• Water-repellent and viscoelastic for preservation and retouching
• Highly resistant to acids, liquors and other aggressive environmental influences

Zinc Spray

Spherical zinc pigments guarantee high-tech corrosion protection

Spherical zinc pigments guarantee high-tech corrosion protection. They achieve an active corrosion protection by the high zinc content of 95% and also lead to an excellent connection between pigment and epoxy resin.
• quick-drying, durable corrosion protection and elastic, abrasion-resistant protective layer, highly resistant to aggressive environmental influences
• ideal for spot welding
• Zinc paste may be used in drinking water systems (after testing by DVGW)

Zinc Paste

Zinc Paste provides long-lasting corrosion protection

With a zinc purity of 98.5 – 99.7 %, Zinc Paste provides long-lasting corrosion protection. It dries fast, leaving a zinc grey coat. The past is used to restore the worn corrosion protection after the welding process. For instance, weld seams can be covered with the paste.
• Zinc purity: 98.5 – 99.7 %
• Zinc content in the dry coating: 95 %
• Fast-drying

Anti-Seize

Anti-seize is extremely resistant and prevents corrosion and surface abrasion.

Anti-seize is extremely resistant and prevents corrosion and surface abrasion.
It is abrasion-, flash-, and rinsing-proof and prevents friction corrosion as well as seizing of bolts, hinges and bolted connections.
It contains no abrasive ingredients, so the surfaces won’t be attacked by abrasions.
The paste also features a low friction coefficient and high oxidation resistance. This way, friction corrosion is prevented and electrochemical corrosion, in which different metals get into contact and the less noble metal will corrode, is avoided. In addition, the single parts are protected against fretting corrosion, which keeps threads functioning smoothly and relevant components, such as nuts, fitting.
Its select inorganic solid lubricant combination, embedded in special synthetic oil, makes it resistant to cold and hot water, oil, benzine, and most acids and liquors.
Welding nozzles are protected from weld spatter, and slow-running bearings on eccentric action machines, curved disks, chains and antifriction bearings can be lubricated.
This way, surface abrasion is prevented, providing for more precise torques. It also makes unfastening hot screws easier and in addition makes them reusable.
The solid lubricant paste is free from nickel and lead, so it won’t cause any allergies against these materials. It also contains no sulphur, halogens or silicone oil.
• Resistant to cold and hot water, oil, benzine, and most acids and liquors
• Abrasion-, flash-, and rinsing-proof, free from abrasive ingredients
• Protection even at extreme pressures of up to 200 N/mm2
• Contains no nickel, lead, sulphur, halogens or silicone oil

Metal-free Anti-Seize

Metal-free Anti-Seize settles in porous and cracked sliding surfaces, thus reducing wear and tear of the parts

Metal-free Anti-Seize settles in porous and cracked sliding surfaces, thus reducing wear and tear of the parts. Its select inorganic ingredient combination makes it resistant to most acids and liquors, benzine, oil, and cold and hot water. In addition, the high-performance lubricant is flash-, rinsing- and abrasion-proof. Friction corrosion is prevented, electrochemical corrosion is avoided, and the components are protected from fretting corrosion. Once applied, the paste also provides a protective film, galling between the components. The absence of abrasive ingredients leaves the surfaces unharmed.
The high-temperature paste also serves as a sealant for the correction of inaccuracies on flanges and flat gaskets, for more precise torques. It facilitates unfastening hot screws so that they can be reused.
Components are protected from striations and seizures even at extreme pressures of up to 220 N/mm2.
Metal-free Anti-Seize is also used i.a. with compression glands and gland packings, with pipe screw connections, and with sliding surfaces subject to high thermal loads.
• Sealant for the correction of inaccuracies on flanges and flat gaskets, for more precise torques. Makes unfastening hot screws easier and in addition makes them reusable.
• Prevents electrolytic corrosion and galling

Food-Tech-Oil

Since 1944, the NSF (National Sanitation Foundation), an independent organization in the US, has been certifying products, crafting standards and carrying out tests in order to protect foodstuffs, water, and consumer goods. Wherever food products might get into occasional or technically unavoidable contact with lubricants in foodstuffs production, only lubricants that have been certified by the NSF under class H1 should be used.
• No tendency to become resinous or glutinous even with very long use
• High resistance to ageing without quality loss
• Lubricating oil based on highly purified oils
• For lubricating and servicing items used in the production, treatment or putting in circulation of foodstuffs
• Good corrosion- and abrasion protection
• Temperature-resistant up to approx. 150°C/302°F
• May get in touch with foodstuffs in accordance with the German Food, Consumer Goods and Feed Code (LFGB)
• Free from animal ingredients
• No labelling required under the CLP Regulation
• NSF certification no. H1 143544

Aqua-Form

Aqua-Form is a water-based deforming wax that stands out for its high heat transfer coefficient

Aqua-Form is a water-based deforming wax that stands out for its high heat transfer coefficient. This guarantees optimal mould cooling, and the mould service life can be extended accordingly. So it is suitable for deforming processes such as pipe bending, calibrating, dilating and crimping. For light to medium deformation strains it can be used wet and dry.
Corrosion inhibitors provide temporary corrosion protection to both the mould and the work piece. This makes Aqua-Form suitable for steel-, stainless steel-, non-ferrous- and light metal deformation processes. Also high-quality metal alloys, sheet metal forming and combined cutting and drawing are not a problem.
Aqua-Form can also be used as a welding separating agent; it does not have to be removed prior to welding.

Safety & sustainability
The product is non-flammable and also stands out for its skin-friendliness. About 40 % of the solids contained therein are materials from renewable raw materials. It contains no mineral- or synthetic oils and no chlorinated paraffins.
• Water-based deforming wax with a high heat transfer coefficient
• Suitable for a wide variety of deforming processes
• For wet and dry use with light to medium deformation strains
• Temporary corrosion protection
• Suitable for steel/stainless steel, non-ferrous/light metal, high-quality metal alloys, and sheet metal
• Can also be used as a welding separating agent
• Non-flammable / skin-friendly
• Free from mineral- or synthetic oils; without chlorinated paraffins